Light source is mainly rely on its unique fame, its unique light small caliber cup design and precise positioning principle makes the light focusing efficiency is very high, so it is extremely high lumen volume are the leading cause of its high calorific value, which will also lead to the early 200W light burst rate increased. Therefore, cooling light is different from the traditional way of heat dissipation, the wick is fine, isolation layer, and there is no outside so, if using the traditional cooling methods of lamps for cooling, heat dissipation is the bigger the better model is not feasible, so heat will cause lamp ionization constant curvature the ionization, will directly affect the service life of the lamp bulb, if the heat is not standard, will make the bulb will blow up, so, this requires the light must have a constant temperature system.
The stage lighting manufacturers to provide two kinds of current domestic cooling mode, 1 kinds of traditional cooling methods is ordinary, only good for fan lamp heat treatment. At the same time synchronization with the temperature control switch, second kinds of software is very constant temperature cooling high-end, is to rely on some software to control the fan temperature, if the way to fan slow or failure will automatically be bulb protective extinguished, not fried bubble, compared two ways, stage lighting manufacturers recommend the use of the latter, even using the former bulb not fried bubble, but a great influence on the service life of the bulb |
